The MGS Group is an established, world-class wire & cable and automation machinery manufacturer and solutions provider. Our first-rate designs and solutions and cherished good reputation is a direct reflection of the quality of our employees.
We are seeking highly motivated candidates to fill the following positions posted below. We welcome you to apply today!

Rome, NY

Electrical Engineering Intern

Electrical Engineering Intern: Position would expose the candidate to a variety of aspects of machinery automation controls such as design, programming, and product testing. Work with a small but dynamic engineering team driving the market of automatic machinery for wire, cable, tubing and fiber optics. Candidates should be pursuing a degree in Electrical Engineering or a related degree program. Will gain experience with automation control systems for industrial machinery by working with AutoCAD, electrical schematics for control panels, programmable logic controllers (PLCs), human-machine interfaces (HMIs), and AC and DC variable speed drives. Part-time position could lead to a permanent full time position following graduation. We offer a clean working environment.

Apply »


Electrical Engineering Technician

ELECTRICAL ENGINEERING TECHNICIAN: Position would put the candidate into all aspects of machine controls, process and product testing.  Be a part of a dynamic engineering team driving the market of automatic machinery for wire, cable, tubing and fiber optics. Ideal candidates should have a background in electrical control systems for industrial machinery.  Working knowledge of programmable controllers, HMIs, AC/DC variable speed drives, servo drives, sensors, schematics for control panels and AutoCAD preferred.  Industrial experience and wire and cable process knowledge a plus.  Some travel for startup of systems is required.  A minimum of an associate’s degree in Electrical Engineering Technology is required. We offer a clean working environment and a competitive wage and benefits package.

Apply »


Machine Assembler

As a MACHINE ASSEMBLER you will be asked to perform assembly of mechanical, pneumatic, hydraulic, custom design mechanical assemblies.  Set up and operate machine tools, fit and assemble parts, work concurrently with electrical technicians, and accountability for the finished quality of the machine through shipment. JOB RESPONSIBILITIES include: Mechanical assembly of custom machinery. Be able to perform troubleshooting activities if needed. Verify dimensions, alignments, and clearances of finished assemblies for conformance to specifications. Demonstrate the ability to learn how to interpret blueprints, sketches, models, or specifications to plan sequences of mechanical assembly. Fit and assemble parts to make, repair, gauges using machine tools and small hand tools. File, grind, shim, and adjust different parts to properly fit them together. Lift, position, and secure machined parts and large assemblies using hoists, fork trucks or other proper lifting devices according to company safety standards. Working constructively with mechanical and electrical engineers to troubleshoot assemblies. Willingness to perform a variety of tasks and relocate to different production areas as need of the business changes. Need the ability to be Fork Truck Certified. Physical Limitations: Work may require lifting, pulling, and carrying up to fifty (50) pounds; frequent bending, climbing stairs, and reaching; standing up to six (6) hours per day.  

Apply »


Machinist / CNC Machinist

As a MACHINIST/CNC MACHINIST under general supervision, you will be required to set up, adjust, and operate a variety of machine tools which may include computerized numeric control lathes, mills and manually operated equipment such as engine lathes, milling machines, surface grinders, etc. JOB RESPONSIBILITIES include: Will be required to read blueprints, perform varying levels of shop mathematics associated with machining operations. Perform inspection procedures to verify work using precision measuring instruments, machinists’ hand tools, machinists’ handbooks, sketches, fixtures, tables and charts. Expertise in a particular machining process or work on one single purpose machine which may involve multiple machining processes. Thorough knowledge of, and apply, machine shop theory and practice including machinability of metals to select feeds, speeds, and cutting oils and coolants. CNC Programming experience using Edgecam or similar offline software a plus. Physical Limitations: Work may require lifting, pulling, and carrying up to fifty (50) pounds; frequent bending, climbing stairs, and reaching; standing up to six (6) hours per day.

Apply »


Industrial Electrician

As an INDUSTRIAL ELECTRICIAN/CONTROLS PANEL BUILDER you will be responsible for wiring new machine builds to completion and termination to control panels or terminal strips based on approved electrical schematics.  Designing layouts for new panel builds and troubleshooting electronic components parts in new electrical panels. Install electrical systems, apparatus, and electronic components in new machine builds as directed by electrical engineering. Following basic electrical code, schematic diagrams, blueprints, and other specifications will prove to be guideline for success. JOB RESPONSIBILITIES include: Willingness to wire new machine builds on floor incorporating strong mechanical aptitude for heavily customized equipment Panel layout and design according to schematics/drawings a plus Read electrical schematics and drawings and provide feedback and markups to engineering to help document drawing changes Operate necessary hand and power tools required Be familiar with electrical control components Assemble equipment from blueprints and take verbal instructions Experience with industrial controls is required Be thorough and detail orientated when communicating concerns or issues Knowledge of reading electrical schematics/drawings is a plus Prior control panel building experience is a plus Knowledge of AC & DC drives and 3-phase power is a plus Ability to travel a plus Physical Limitations: Work may require lifting, pulling, and carrying up to fifty (50) pounds; frequent bending, climbing stairs, and reaching; standing up to six (6) hours per day.

Apply »


Service Engineer

Service Engineer SERVICE ENGINEER: Position would challenge the candidate in all aspects of machine operation, troubleshooting and repair.  Mechanical operation, controls, process and product testing.  Be a part of a dynamic design team driving the market of automatic machinery for wire, cable, tubing and fiber optics. Candidates should have a background in service (or design) of industrial machinery.  Working knowledge of AutoCAD, mechanical aptitude, reading electrical control system schematics, AC/DC variable speed drives, HMIs and programmable controllers are all good areas to have experience in.  Wire and cable process knowledge a plus.  Travel for startup and/or service of systems is required. A minimum of an associate’s degree in Engineering Technology is desired, along with industrial experience is required. We offer a clean working environment and a competitive wage and benefits package.

Apply »


Electrical Engineer

ELECTRICAL ENGINEER: Position would put the candidate into all aspects of machine controls, process and product testing.  Be a part of a dynamic design team driving the market of automatic machinery for wire, cable, tubing and fiber optics. Candidates should have a background in electrical control systems for industrial machinery.  Working knowledge of AutoCAD, schematics for control panels, AC/DC variable speed drives, HMIs and programmable controllers required.  Wire and cable process knowledge a plus.  Some travel for startup of systems is required. A minimum of an associate’s degree in Electrical Engineering Technology, along with industrial experience is required. We offer a clean working environment and a competitive wage and benefits package.

Apply »


Mechanical Machine Designer

MECHANICAL MACHINE DESIGNER: Position would put the candidate into all aspects of machine design.  Concept, detail, assembly designs, manufacturing and product testing.  Be a part of a dynamic design team driving the market of automatic machinery for wire, cable, tubing and fiber optics. Candidates must be proficient in AutoCAD, Inventor (or Solidworks) and have a strong background in machine design and mechanical assemblies. Must be capable of taking direction from senior design engineers and working in a team atmosphere. A minimum of an associate’s degree in Mechanical Technology, along with industrial experience is required. We offer a clean working environment and a competitive wage and benefits package.

Apply »


North Branford, CT

Mechanical Engineer

MECHANICAL ENGINEER: Position would put the candidate into all aspects of machine design.  Concept, detail, assembly designs, manufacturing and product testing.  Be a part of a dynamic design team driving the market of automatic machinery for wire, cable, tubing and fiber optics. Candidates should have experience in machine design. Proficient use of AutoCAD, Inventor (or Solidworks) and understanding of standard drafting practice is necessary. Ability to engineer machine designs and modification of existing designs to meet customer specifications is required. A BS degree in Mechanical Engineering is preferred, along with industrial/machine shop experience. We offer a clean working environment and a competitive wage and benefits package.

Apply »


Electrical Engineering Technician

ELECTRICAL ENGINEERING TECHNICIAN: Position would put the candidate into all aspects of machine controls, process and product testing.  Be a part of a dynamic engineering team driving the market of automatic machinery for wire, cable, tubing and fiber optics. Ideal candidates should have a background in electrical control systems for industrial machinery.  Working knowledge of programmable controllers, HMIs, AC/DC variable speed drives, servo drives, sensors, schematics for control panels and AutoCAD preferred.  Industrial experience and wire and cable process knowledge a plus.  Some travel for startup of systems is required.  A minimum of an associate’s degree in Electrical Engineering Technology is required. We offer a clean working environment and a competitive wage and benefits package.

Apply »


Electrical Engineer

ELECTRICAL ENGINEER: Position would put the candidate into all aspects of machine controls, process and product testing.  Be a part of a dynamic design team driving the market of automatic machinery for wire, cable, tubing and fiber optics. Candidates should have a background in electrical control systems for industrial machinery.  Working knowledge of schematics for control panels, AC/DC variable speed drives, HMIs and programmable controllers required.  Wire and cable process knowledge a plus.  Some travel for startup of systems is required. A minimum of an associate’s degree in Electrical Engineering Technology, along with industrial experience is required. We offer a clean working environment and a competitive wage and benefits package.

Apply »


Northampton, UK

No Job posting at this time.